Archiving
414 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
The automatic
searching tool dis-
playing matching
patient information
in the Patient list
can be turned off
(see page 626)
When default configured, the system automatically
searches to see if the patient is already in the database.
The result of this search is displayed in the Patient list field.
5. Trackball to the actual patient and press the Trackball
SET
key.
The patient record is highlighted.
6. Press
SELECT PATIENT
Or
Press [+] in front of the actual patient record and select the
desired examination.
The Examination List window for the actual patient is
displayed (refer to Figure 9-10).
CAUTION
Do NOT use '\' or '^' in patient information fields, as these
characters might cause problems with some DICOM devices.
To Next Page
Loading...
