Archiving
416 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Advanced search
The list of searching
filters may vary de-
pending on the
Dataflow selected
To restrain the search to a specific patient group, one or more
filters may be applied to the search. The table below shows the
filters applicable to a patient search:
Searching with filter:
The unit can be con-
figured to display
the Advanced
search tool as de-
fault (see page 626)
1. Trackball to the More button in the Search/Create Patient
window.
2. Press
SET on the control panel.
The Search/Create Patient window is extended displaying
the searching filters (see Figure 9-9).
3. Type the information in the required searching filter field.
4. Type the patient Last Name, and/or ID.
The matching data is displayed in the Patient list when the
automatic search function is turned on.
Note: Use "Other ID" if relevant - For further information see
"Using other ID" on page 99.
Sorting data
The search result can be sorted according to the fields
displayed in the patient list, in ascending or descending order.
Searching filter
Echolab
Diagnostic code
Born between
Examination date between
Current date
Images: patient records with examinations with images
Stress examinations: patient records with stress echo examinations
No Report: Patient record with examination(s) without stored
reports
Category: displays only patient records for the selected category
Diagnosis Physician
To Next Page
Loading...
