Archiving
446 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Figure 9-31: DICOM worklist properties window
2. Select the DICOM server from the IP-address pull-down
menu.
Follow the steps below if the IP address settings for the
DICOM server need to be modified or created:
• Select <Modify> from the IP-address pull-down menu.
The IPs window is displayed.
• Select the DICOM server and press Modify in the IPs
window (or press Add if creating a new IP address).
The Enter name and IP window is displayed.
• Enter the name and/or IP address of the server and
press OK to return to the Properties window.
To Next Page
Loading...
