Archiving
Vivid S5/Vivid S6 User Manual 455
R2424458-100 Rev. 2
and needs to be formatted. If yes an Information window
is displayed asking the user whether or not to format the
media.
Figure 9-38: Media Formatting window
• If desired enter a new label and select OK.
Note: Only the following characters and signs can be
used when labelling a media: A - Z, a - z, 0 - 9, "_" and
"-". Do not use more than 11 characters or signs. Do not
use space.
• If the media is not empty, the Add files window is
displayed.
Figure 9-39: Add files window
Select Yes.
The system is preparing the media to allow addition of
new files.
Note: If Eject is selected, the user is prompted to insert
another media. If No is selected, the Export Dialogue
window is displayed (Figure 9-35), where the user can
select another destination.
To Next Page
Loading...
