Report
510 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
2. With the new statement selected, press Add.
A new underlying entry is created and the parent
statement is changed to a Combo box statement ( ).
3. With the new underlying entry selected, follow the following
steps:
• Enter a name in the Label field.
• Enter a text in the Findings text field.
• Enter a conclusion in the Conclusion text field (optional).
4. Repeat the procedure from step 2 to create as many
underlying statements as necessary. Each underlying
statement will be a selectable entry in the combo box.
Statement group
Statement groups are created by changing a combo statement
to a statement group.
1. Create a combo box statement as described above.
2. Make sure the combo box statement is selected and
deselect the option Enable pull-downs.
The combo box statement is changed to a statement group
( ). Each underlaying entries are changed to check box
statements.
Editing a statement
Tab label, statements and statement alternative texts can be
edited.
1. In the Structured Findings configuration window
(Figure 10-6), select the item to edit.
2. Make the required changes.
To Next Page
Loading...
