Report
522 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Inserting archive information
Archive information contains all the objects of the different
information menus (Patient, Exam, Study and Site Information).
You may display the archive information over two columns
using a table container as described below.
1. Insert a table for the archive information to the desired
location (a table cell or directly in the report template).
2. Select the first table cell.
3. Select Insert and Archive information.
The Archive information box is displayed.
Figure 10-18: The Archive information box
4. If desired, enter a heading and select a heading link from
the pull-down menu.
5. Select the Information parameters to be displayed in the
first cell.
Select Box properties to change the font, alignment,
appearance, etc.
6. Select OK.
7. Select the next table cell and repeat steps 3 to 6 to enter the
remaining archive information.
To Next Page
Loading...
