Peripherals
580 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
DVR playback on the system
1. In order to play-back any of the recordings on the current
DVR media, simply press the Playback button (F12).
2. Within about 1 minute for the media to load. The recording
of the first title will soon start to play.
3. While in Playback mode the softmenu will contain different
dedicated playback controls.
Note: Upon changing from recording to playback mode, the
system will close the current title. Any further recording will be
made on a new title.
DVR playback controls
• Chapter select rotary - Rotate the rotary to display a list of
all titles on the current media. Highlight the required title
and press rotary to select and play the desired title.
• Title select rotary - Rotate the rotary to advance to any
desired chapter. The selected chapter will begin to play as
soon as the rotary is held still.
• Play/Pause button - Press this button to toggle between
Play & Pause.
• Next /Previous Title / Chapter - Four buttons allowing to
skip chapter or title
• Cineloop - Press this button to capture the last few
seconds of playback into frame-memory and run them in
cineloop mode.
• Left & Right markers - Allows you to trim the cineloop
borders.
• Frame rotary - When cine is stopped, allows you to view the
recording frame by frame.
• Speed rotary - When cine is running, allows you to modify
the cine review speed.
• Freeze button - When playback is running, press Freeze to
stop playback. Once stopped, use the trackball to review
the last few seconds captured in the frame-memory.
• 2D Freeze button - When the Freeze button has been
pressed, use the "2D Freeze" button to run or stop looping
the last few seconds of captured playback frames.
To Next Page
Loading...
