Getting started
58 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Viewing Current Battery Status
When the system is running, a status icon is displayed in the
system Status bar to indicate the current battery status.
Note: The % values mentioned above may fluctuate by up to +/- 3 %
points.
View Detailed Battery Status
In order to view further details about the battery status, click on
the battery-status icon. A more detailed status description
appears.
A special message may appear, suggestion to replace the
battery soon. This message may appear when the battery has
aged to such an extent that even after prolonged charging it will
not hold enough charge.
Peripherals/Accessory connection
The external Peripherals / accessories connectors are situated
on the rear side of the unit See Figure 2-6.
Refer to page 575
for further informa-
tion on peripherals.
Peripherals/Accessory Connector Panel
Vivid S5/Vivid S6 peripherals and accessories can be properly
connected using the rear connector panel.
Table 2-2: Battery status icons
Icon Status Description
AC Power is ON; no battery present
AC Power is ON; battery is fully charged (80%-100%)
AC Power is ON; battery is partially charged (40%-80%)
AC Power is ON; battery is almost empty (10%-40%)
CAUTION
Use only approved peripherals, accessories or probes.
DO NOT connect any accessories or probes without approval by GE
To Next Page
Loading...
