Getting started
Vivid S5/Vivid S6 User Manual 75
R2424458-100 Rev. 2
Basic Mode Parameter Adjustment Controls
The following controls are used to modify and adjust the unit’s
display to best suit the user’s requirements, such as color, gain,
zoom and image depth, according to the mode being operated
by the user.
Depending on the options installed on the scanner,
this key will bring up the softkey menu for selection
of additional optional scanning modes, such as
AMM, TVI, DTI, TSI, SRI, SI, etc.
The Quantitative Analysis option will also appear (if
installed) as a softkey button named Q Analysis.
Note: Some functions are available only on
Vivid S6.
Note Key Description
Controls Description
Gain rotary Controls the total gain of the gray scale images
in 2D Mode.
ATO (Automatic tissue optimization) - while in 2D
press the rotary knob to optimize 2D image
automatically.
Active mode
rotary
Controls the total gain of other activated modes,
such as, M-Mode, Color, PW, or CW Doppler
modes.
In combined mode, switches between the mode
specific assignable controls without having to
exit each mode in order to control it.
TGC Six sliding keys that compensate for
depth-related attenuation in an image. The upper
slider corresponds to the smallest depth.
To Next Page
Loading...
