Getting started
Vivid S5/Vivid S6 User Manual 87
R2424458-100 Rev. 2
Three-Pedal Footswitch operation
The footswitch is used to free the hands of common key
operations, such as select keys, video recording, etc. The three
switches have different function assignments depending on the
current application (see page 593).
To connect the footswitch
• Connect the footswitch to the USB input on the External
connector (see Figure 2-6, page 59).
Connecting and disconnecting probes
The connector panel situated in the front of the Vivid S6 has
three imaging probe ports type RS, one imaging probe port
type OR, and one pencil probe port.
The connector panel situated in the front of the Vivid S5 has
three imaging probe ports type RS and one pencil probe port.
To connect a probe (Small connector - type
RS)
1. Hold the probe connector vertically with the cable pointing
upward.
2. Push the connector locking handle to the right-most
position.
3. Align the connector with the probe port and carefully push
into place.
4. Push the connector locking handle to the left-most position.
WARNING
The standard footswitch is not for use in the operating room.
CAUTION
Handle the probes gently while connecting and disconnecting.
WARNING
Do NOT touch the patient and any of the connectors on the
ultrasound unit simultaneously, including ultrasound probe
connectors.
To Next Page
Loading...
