Presets and System setup
616 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Connectivity
This configuration setup category deals with:
• Dataflow: connection and communication setup of the
ultrasound unit with other devices.
• Additional output: configuration of the
PRINT and ALT keys
on the control panel.
• Tools: formatting of removable media
• Formats: configuration of the Examination list window and
other tools related to patient management.
• TCPIP: internet protocol configuration
Dataflow
Communication between the Vivid S5/Vivid S6 ultrasound unit
and other information providers on the network takes the form
of dataflows. Each dataflow defines the transfer of patient
information and images from an input source to the unit, and
from the unit to one or several output sources. Input/output
devices cannot be added/removed to/from the pre-defined
dataflows. However the settings for the devices can be
adjusted.
A dataflow is a set of pre-configured settings. Selecting a
dataflow will automatically customize the unit to work according
to the settings associated with this dataflow.
Dataflows are configured in the Dataflow sublevel sheet in the
Connectivity setup category as described below. The Dataflow
sublevel sheet is only available to users with administration
rights.
To Next Page
Loading...
