Basic scanning operations
126 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Physio controls
Physio assignable controls
Common controls
Horizontal sweep
Adjust the refresh rate of the physiological trace. This control is
active only in 2D and color modes. The sweep speed of the
physio traces in M-Mode and Doppler is identical to the
M-Mode or Doppler horizontal sweep adjusted by the user.
Gain
Enables the user to change the amplitude of the physiological
trace displayed on the screen.
Position
Enables the user to move the physiological trace on the screen.
ECG
Turns the ECG trace on and off.
Invert
Inverts the ECG trace upside down.
QRS visible
Shows/hides the QRS marker on the ECG.
Displaying the ECG trace
To turn the ECG
display off, press
PHYSIO and press
the assignable
ECG
Cardiac applications
The ECG is turned on by default in all cardiac applications.
Other applications
1. Press PHYSIO on the control panel to get access to the ECG
controls.
2. Press the assignable
ECG to display the trace.
Adjusting the display of the ECG trace
Adjusting the ECG trace sweep speed
1. Press PHYSIO on the control panel.
To Next Page
Loading...
