GE Vivid S6 - Deletion of a Trace; To Delete All Traces; To Delete One Specific Trace; Saving;Retrieving Quantitative Analysis

Quantitative Analysis
Vivid S5/Vivid S6 User Manual 389
R2424458-100 Rev. 2
Deletion of a trace
The user can delete all traces at once or one at a time.
To delete all traces
1. If necessary, press TRACKBALL until the QA trackball
assignment is selected.
2. Press
UPDATE MENU in the trackball area on the control
panel.
The System menu is displayed.
3. Trackball to Delete all traces.
4. Press
SET.
To delete one specific trace
1. If necessary, press TRACKBALL until the QA trackball
assignment is selected.
2. Trackball to the sample area to delete.
3. Press
UPDATE MENU in the trackball area on the control
panel.
The System menu is displayed.
4. Trackball to Delete trace.
5. Press
SET to perform deletion.
Saving/retrieving Quantitative analysis
1. Press IMAGE STORE to save the quantitative analysis
session.
2. To recall the Quantitative analysis session, select the icon
on the clipboard, and press the assigned key
Q ANALYSIS.