Archiving
408 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
(see page 590), the following procedures enable the cineloop
to be stored directly.
Storing cineloop without preview
The function Preview Loop before store is disabled (see
page 590).
• While scanning, press
STORE.
The last valid cineloop is stored in the archive and a
thumbnail is displayed on the clipboard.
Scanning resumes immediately.
Storing cineloop with preview
The function Preview Loop before store is enabled (see
page 590).
1. While scanning, press
STORE.
The last valid cineloop is previewed on the screen (but not
stored).
2. If desired, press
CINELOOP and adjust the cineloop to be
stored using the assignables (see page 110).
3. Press
STORE to save the cineloop.
A thumbnail is displayed on the clipboard.
Saving images and cineloops to a
standard format
Images and cineloops can be saved to a removable media or a
shared network folder in the following standard formats:
• Still images: JPEG, MPEG, DICOM and RawDICOM (Raw
data + DICOM), and HDF
• Cineloops: AVI, MPEG, DICOM and RawDICOM (Raw
data + DICOM), and HDF
Images can also be stored as MPEG format on a CD-R using
the Export function as described on page 410.
Procedure:
1. In live: press FREEZE.
In replay: select an image thumbnail on the clipboard.
2. Press UPDATE/MENU on the control panel.
The System menu is displayed.
To Next Page
Loading...
