Archiving
406 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Storing images and cineloops
DICOM images are
stored to formatted
Magneto Optical
disks separately
from patient data.
Images and cineloops that are stored during a current
examination are displayed as thumbnails on the clipboard (see
Figure 9-1). When an image is stored, all the additional
information that is displayed is saved with it (i.e. probe and
application selected, image setting, annotations or
measurements, etc.).
The image archive is set by the dataflow selected (see
page 616 about available dataflows and default dataflow
selection).
In addition, stored images and cineloops can be saved to a
removable media in the standard formats JPEG, AVI (cineloop),
MPEG and DICOM (see page 408).
Figure 9-1: The Clipboard on the scanning screen
CAUTION
Do not use the internal hard drive for long-term image storage.
External storage media or network-based server solution is
recommended for image archive.
CAUTION
If working off-line with a dataflow pointing to a DICOM server, the
images stored during the examination will have to be manually
resent in the DICOM spooler (page 479) when reconnecting the
unit. Resend all jobs that are failed or on hold (See page 479 for
more information on DICOM spooler.).
1. Single image stored
2. Cineloop stored Scrolling tool
3. Scrolling tool
4. Serial number of image
To Next Page
Loading...
