Measurement and Analysis
Vivid S5/Vivid S6 User Manual 317
R2424458-100 Rev. 2
3. Use the Ellipse control to adjust or change inclination or
Hip Rotate.
4. Press
SET to fix the baseline.
5. The system displays a circle representing the femoral head.
Use the Trackball to position the circle.
6. Use the Ellipse control to size the femoral head
circumference.
7. Press
SET to fix the femoral head circumference.
The system displays the d:D ratio for the femoral head in
the Results window.
Performing an OB exam
Patient entry
1. Enter a New Patient or a New Exam for an existing patient
by following the procedure "Starting an examination" on
page 95.
Note: Use "Other ID" if relevant - For further information
see "Using other ID" on page 99.
2. When the Search/Create Patient screen appears, the
Category field should be preset to Obstetrics. Change it if
required.
3. Enter or validate the patient's Last name, First name, ID
and birth-date or age.
4. Click the Create Patient softkey
5. To add an additional patient information click Patient.
6. Select Current Patient Information.
The Patient Information screen appears (see
Figure 7-39). Use the fields in this screen to enter various
data (see Table 7-1)
7. After entering data click the Begin Exam softkey to
continue with the exam and get a scanning screen.
Alternatively, click 2D Mode to continue scanning.
To Next Page
Loading...
