GE Vivid S6 - Configuration of the Template Selection Menu

Report
532 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Configuration of the Template selection
menu
The Template selection menu displays the application specific
report templates that can be selected when creating a report.
The Template selection menu can be configured to display only
the templates of interest.
Inserting a template in the Templates
selection menu
1. Press CONFIG and select Report.
The Report template sheet is displayed (Figure 10-26)
2. In the Available templates field (left field), select the
template to insert in the Template selection menu.
3. Next to Section, select the appropriate application.
4. Press the Right arrow button .
The selected template is inserted in the Template selection
menu.
Note: Double-clicking on a template in the Available
template field will also insert the template in the Template
menu.
Removing a template from the Template
selection menu
1. In the Report template menu field (right field), select the
template to remove.
2. Press the Left arrow button .
The selected template is removed from the Template
selection menu.
Note: Double-clicking on a template in the Available
template field will also insert the template in the Template
menu.
Sorting the templates in the Template
selection menu
1. In the Report template menu field, select the template to
move.
2. Press the Up or Down arrow buttons .
The selected template is moved accordingly in the
Template selection menu.