Measurement and Analysis
354 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Using Worksheet
• Press WORKSHEET on the control panel and select the
measurement type (see Figure 7-59).
To scroll through pages
• Select PAGE DOWN or PAGE UP.
To select the type of value
1. Trackball to the relevant cell in the Method column.
2. Press
SET.
A pop-up menu is displayed showing the different options
available (Figure 7-60).
Figure 7-60: The Calculation method options list.
3. Trackball to the required option.
4. Press
SET.
The value is updated accordingly.
Excluding or including measurements
One or more measurement values from a set of measurements
for a parameter can be excluded when doing average
calculation.
To exclude a measurement
1. Trackball to the measurement value to exclude.
2. Press
UPDATE MENU.
The Worksheet menu is displayed.
When excluded the
measurement dis-
play turns grey.
3. Trackball to Exclude Value.
4. Press
SET.
1. Average of the measurements taken
2. Maximum measurement
3. Minimum measurement.
4. Last measurement that was taken
To Next Page
Loading...
