GE Vivid S6 - The Modify Calculations Sheet; Parameter Configuration

Presets and System setup
604 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
The Modify Calculations sheet
The Modify Calculations sheet is used to configure the
calculations to be performed when doing a Doppler vascular
measurements.
Figure 13-8: The Modify Calculations sheet
Parameter configuration
The following example describes how to configure the Carotid
Doppler calculations:
1. In the Modify Calculations sheet, select Vascular next to
M&A Categories.
The Vascular measurement category is displayed.
2. Select Carotid.
The available calculations are displayed.
3. Check the desired calculations to be performed.
4. Select Save.