Report
514 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Direct report
Direct report enables the user to insert comments at any time
during the examination that will be part of the final report.
Direct report provides also an overview over the measurements
completed.
Creating comments
1. Press UPDATE MENU.
2. Select Direct report (see Figure 10-12).
3. In the Direct report screen, select the comment type.
4. Type your comments in the Text field.
5. To add a measurement in the comment, double-click a
measurement in the Measurement overview field.
Figure 10-12: The Direct report
1. Open Direct report
2. Select the type of information
3. Create/insert pre-defined text
4. Text field
5. List of measurements completed
6. Exits the Direct report
To Next Page
Loading...
