Basic scanning operations
Vivid S5/Vivid S6 User Manual 107
R2424458-100 Rev. 2
Using the Soft Menu Rocker
The Soft menu Rocker on the control panel enables the
adjustment of controls mapped in the Soft menu Window (see
Figure 3-1).
The first row of the soft menu indicates the name of the active
mode and its status (freeze/live). The following rows list the
mode-specific controls.
The relative setting of each control is indicated by a gauge bar
filling the cell as the control value increases. The number
appearing on each of the gauge bars indicates the value
associated with the relevant control.
To select a control from the menu
1. Press any part of the 4-way rocker to display the soft menu.
2. Press the vertical arrows on the 4-way Rocker to navigate
up or down through the menu.
The frame of the selected row is highlighted.
To adjust values
Note: when soft
menu is not access-
ed for a defined peri-
od of time it will
time-out and disap-
pear from the dis-
play. (See page 633
for information on
how to configure
timeout).
• Press one of the horizontal arrows on the 4-way Rocker to
adjust the setting of the selected control.
- Right arrow increases control setting.
- Left arrow decreases control setting.
To Next Page
Loading...
