Basic scanning operations
Vivid S5/Vivid S6 User Manual 127
R2424458-100 Rev. 2
2. Adjust the assignable button HORIZONTAL SWEEP to change
the sweep speed.
Adjusting the ECG trace amplitude
The ECG signal's
amplitude may vary
between patients
due to different skin
moisture and other
physiological pa-
rameters.
1. Press PHYSIO on the control panel.
2. Adjust the assignable button
GAIN to adjust the amplitude of
the trace.
Adjusting the ECG trace position
1. Press PHYSIO on the control panel.
2. Adjust the assignable button
POSITION to move the trace
vertically.
CAUTION
Do not use the Vivid S5/Vivid S6 Ultrasound system ECG physio
waveform for diagnosis and monitoring.
To Next Page
Loading...
