Getting started
Vivid S5/Vivid S6 User Manual 93
R2424458-100 Rev. 2
To tilt the LCD monitor
Grab the top side of the LCD monitor frame and pull or push to
tilt the monitor to the desired position.
To reduce system's height, or if more visibility is required during
transportation, fold the LCD monitor forward to a horizontal
position, it will lock horizontally in place.
To fold the LCD monitor Horizontally
Pull out the spring-loaded locking knob to release the display's
locking mechanism (see Figure 2-17), pull and lower the
display towards you. When fully horizontal release the knob.
To unfold the LCD monitor
Lift the display and pivot it to a vertical position. Adjust the tilt of
the display to the desired position.
Figure 2-17: Monitor position adjustment
Control Panel adjustment
The system Control panel can be freely adjusted to swivel or
move up/down. There are two brake handles located under the
control panel.
CAUTION
Before folding the LCD monitor, please make sure that the gel
bottle is placed with the dispenser tip down into gel holder or
moved sideways in order not touch the monitor's faceplate.
To Next Page
Loading...
