Basic scanning operations
Vivid S5/Vivid S6 User Manual 105
R2424458-100 Rev. 2
An alternative method for modifying the parameter associated
with this button is to click with the mouse pointer on the
relevant side of the rotary graphics on screen.
Variable Dual parameter button
In this example the rotary knob has access to either “Frame
Rate” or “Low Vel. Reject” parameters.
When the “Frame Rate” upper label is highlighted, the
parameter “Frame Rate” can be increased by turning the
rotary clockwise and decreased by turning the rotary
counterclockwise.
When pressing the rotary knob, the bottom label (“Low vel.
Reject” in this example) will be highlighted. In this case, from
now on, turning the assignable rotary knob will either increase
or decrease respectively the value of the lower (highlighted)
parameter.
At this point, pressing the rotary knob will, again, associate the
rotary with the upper labeled parameter.
An alternative method for modifying one of the parameters
associated with this rotary is to click with the mouse pointer on
the relevant side of the assignable rotary graphic.
On/Off Toggle button
In this example the active green indicator indicates that the
“Simultan.” setting is set ON.
To Next Page
Loading...
