Scanning Modes
190 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Alternative assignable controls
Press ALT to access to the following modes:
• Curved Anatomical M-Mode (see page 155)
• Tissue Synchronization Imaging (see page 188)
• Tissue Tracking (see page 173)
• Strain rate (see page 178)
• Strain (see page 183)
Physio assignable control
Press PHYSIO and MORE twice to access to the following
control:
QRS visible
Shows/hides the QRS marker on the ECG.
TSI Soft menu controls
TSI Cut-off
Controls the cut-off time: using this control it is possible to color
all parts of the TSI image that has a time to peak less than a
certain cutoff time.
Threshold
Controls the level of greyscale intensity that is used as
threshold for color.
Transparency
Control the degree of transparency of the TSI color.
Frequency
Enables the adjustment of the transmission frequency to
control the sensitivity or the level of penetration.
Power
Controls the amount of acoustic power applied. When power is
reduced the signal to noise ratio is also reduced, so that the
image may become noisier.
Cine Compound (Freeze only)
Calculates and displays cineloops generated from a temporal
averaging of multiple consecutive heart cycles. The number of
To Next Page
Loading...
