Measurement and Analysis
320 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
the GA. The system will automatically calculate and display the
LMP and the EDD by GA value.
To exit the Patient Data Entry screen and return to the Scan
screen, you can use one of the following methods:
• Press ESC on the keyboard.
• Select
PATIENT or FREEZE on the control panel.
• Select
2D-MODE on the control panel.
The Scan screen appears.
Setting patient information on the image
Title-bar
In case you wish to display some OB data on the
image-header, such as LMP or GA, the system can be
configured to display this information.
1. Select CONFIG > Imaging > Global.
2. Select Title Bar Line 1 or Line 2 to select the relevant
information to appear on the screen.
Figure 7-40: Setting patient information on the image title bar
To Next Page
Loading...
