Measurement and Analysis
332 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
the first measurement. It then continues with each of the other
measurements in that study.
1. Select the folder for the vessel you want to measure.
The system shows all the measurements for that vessel.
The caliper for the first measurement is automatically
displayed.
2. Make the measurement.
After you complete each measurement, the system starts
the next measurement. After the last measurement is
complete, the system returns to the first measurement.
Your system is set up to show the measurements that you
usually make for each vessel. To make a measurement that is
not shown for the selected vessel:
1. Select the folder for the vessel you want to measure.
2. Select Show All.
The system displays all possible vessel measurements.
3. Select the desired measurement.
Detailed explanations about making the different
measurements and using the different tools are provided in the
Doppler M&A section of the Vascular package (page 309).
The following pages describe the steps to make each specific
measurement in the OB/GYN Vessel study.
To Next Page
Loading...
