Archiving
Vivid S5/Vivid S6 User Manual 451
R2424458-100 Rev. 2
Checking the connection to the DICOM server
1. In the Dataflow sheet, select the DICOM device to verify the
connection to.
2. Press Check.
The verification process may takes several seconds.
• A green check mark is displayed in front of the DICOM
device if the verification is successful.
• A red cross is displayed in front of the DICOM device if
the verification failed.
Data management (DICOM dataflows)
Performing a study
Online scanner
1. In the Search/Create patient window, select a DICOM
dataflow.
2. If a DICOM worklist dataflow is selected, enter a search
criteria and press
QUERY. The patient list is updated.
3. Select or create a new patient and perform the examination
in a usual manner. During the examination images are
temporarily stored in the local buffer on the system.
4. At the end of the study press
END EXAM on the Control
panel. The save images dialogue window is displayed.
5. Press
ALL to save all images on the DICOM server or press
SELECT to display the Image review screen where to select
specific images to be saved. The images are transferred to
the server via the DICOM spooler.
6. Press
F4 or ALT+S to display the DICOM spooler (see
"DICOM spooler" on page 479 for further details).
Offline scanner
When working offline the images are stored in the DICOM
spooler. Images are sent to the DICOM server when
re-connecting the system to the network.
1. If a DICOM worklist dataflow is selected, the patient list
must be queried before the system is disconnected.
2. After offline acquisition, the images stored on the DICOM
spooler are automatically sent to the DICOM server when
connecting the system. Press
F4 or ALT+S to display the
DICOM spooler (see "DICOM spooler" on page 479 for
further details).
To Next Page
Loading...
