Archiving
478 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Depending on the selection, one or two Restore
confirmation windows are displayed (Figure 9-61):
Figure 9-61: Restore confirmation windows
9. Ensure that the correct source is selected an select OK.
The selected items are copied to the systems. If items from
the system configuration are restored the system needs to
be rebooted. The Reboot system window is displayed
(Figure 9-62).
Figure 9-62: Reboot system prompt
10. Select OK to reboot the system.
If connectivity configuration settings have been restored,
make sure to save the TCP/IP settings: select
Config/Connectivity/TCPIP and select Save settings. The
system needs to be restarted again.
To Next Page
Loading...
