Archiving
Vivid S5/Vivid S6 User Manual 481
R2424458-100 Rev. 2
Sending a job to a new destination
Only jobs that
failed or are in hold
can be sent to a new
destination.
1. Trackball to the job to send in the DICOM job spooler
window.
2. Press
SET.
3. Trackball to Send to...
4. Press
SET.
A dialogue window is displayed.
5. Select the new destination from the Destination popup
menu.
6. Trackball to Send.
7. Press
SET.
Holding a job
1. Trackball to the job to hold in the DICOM job spooler
window.
Note: several jobs can be selected. Only inactive jobs can
be set on hold.
2. Press SET.
3. Trackball to Hold.
4. Press SET.
To undo hold, press Resend.
To Next Page
Loading...
