GE Vivid S6 - Page 513

Report
Vivid S5/Vivid S6 User Manual 495
R2424458-100 Rev. 2
To choose another report template
1. Press the assignable TEMPLATE.
The Template selec-
tion menu can be
configured to dis-
play only the tem-
plates of interest
(see page 532).
The Template selection menu is displayed showing the
available report templates organized by application.
2. Do one of the following:
• Select a template from the current application template
list.
• Select another application and select the desired
template from the sub-menu displayed.
Note: From a sub-menu, select Back to return to the
current application template list.
The selected template is displayed on the screen.
Note: After selecting a different report template the selected
template becomes the default template which will be selected
next time
To change patient information
1. Trackball to heading of the information to change.
The trackball marker is changed to a hand with pointing
finger .
2. Press
SET on the Trackball area.
The original location of the data is displayed.
3. Change the information entered if required.
4. Press
REPORT when completed.
Images in the report
• To add an image to the report, place the pointer over an
image in the clipboard and double-click the
SET key.
The image is inserted into the first free image container in
the report.
• To move an image in the report, select and drag the image
to move it to a new image container.
• To replace an image in the report, select and drag an
image from the clipboard over the image to replace in the
report.
• To remove an image from the report, select and drag the
image to remove outside the report page.