Report
Vivid S5/Vivid S6 User Manual 523
R2424458-100 Rev. 2
Inserting an image container
1. Select the location where to insert the fixed text (a table cell
or directly in the report template).
2. Select Insert and Image.
The Ultrasound image box is displayed.
Figure 10-19: The Ultrasound image box
3. If desired, enter a heading, set the container size and
specify the text appearance.
4. Select OK.
Inserting measurement containers
You may display the measurements over several columns
using a table container as described below.
1. Insert a table for the measurements to the desired location.
2. Select the first table cell.
3. Select Insert and Measurements.
The Measurement box is displayed.
To Next Page
Loading...
