GE Vivid S6 - Page 609

Presets and System setup
Vivid S5/Vivid S6 User Manual 591
R2424458-100 Rev. 2
Configuring the Flex button
Click the combo-box menu and select one of the functions on
the list. The selected function will be assigned to the Flex
button.
Configuring the Flex button while in the Global tab will assign
the selected function independent of any probe or application
selection.
Configuring the Flex button while in the Application tab will
assign the selected function only for the selected preset
application.
Cineloop store
Crop images
Doppler
Parameter Description
Cineloop store:
• Time before/after heart cycle: sets the total
storage time span of the cineloop in ECG
mode.
• Time span (no ECG): sets the total storage
time span of the cineloop with no ECG.
• Preview loop before store: when selected
enable review of cineloops before storage.
Parameter Description
Crop images:
: In the Analysis screen, removes top and
bottom of the image when more than two
images have been selected.
Parameter Description
Doppler:
• Show KHz scale: when selected, displays
the KHz scale on the left side of the Doppler
spectrum (see page 164).