User maintenance
652 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Note: Before clicking the "Send" button, verify that
"Checked Out" is displayed at the bottom left corner of the
screen. This indicates that the communications link is
active.
3. After you have completed filling in all the required
information, press Send to initiate the Request for Service.
The following request confirmation appears (Figure 14-8).
Figure 14-8: Request confirmation
4. Select the Queue tab (see Figure 14-9) to check the status
of your request.
Figure 14-9: Screen showing status of requests in queue
5. To identify which users have sent service requests, click the
Users tab (see Figure 14-10).
To Next Page
Loading...
