Getting started
74 Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2
Scan Mode Selection keys
The following keys are used to select the required scan mode,
and to select additional tools that enhance the application’s
capabilities. Refer to page 137 for detailed information about
scanning.
Note: The TVI button is blank on Vivid S5.
Note Key Description
Displays the 2D live acquisition mode that is the
default scanning screen for the unit. For further
information on 2D scanning, refer to page 140.
M-Mode can be
added from a
2D scan also in
replay.
Displays the M-Mode examination screen and
enables M-Mode functions. Used for viewing motion
patterns. For further information, refer to page 150.
Displays the examination screen in Color Flow
Mapping mode. Used to display color-coded blood
flow information. For further information, refer to
page 157.
Displays the examination screen in Pulsed Wave
Doppler mode. Used for displaying the Doppler
spectrum of blood flow at a selected part of the
anatomy. For further information, refer to page 164.
CW mode is not
available on all
scanning
probes.
Displays the examination screen in Continuous
Wave Doppler mode. Allows examination of blood
flow data all along the Doppler CW cursor. For
further information, refer to page 164.
Displays the tissue velocity overlay on 2D and
M-Mode scans. If TVI is on, the Doppler modes
(PW/CW) will also be optimized for tissue velocity.
For further information, refer to page 169.
Note: TVI is optional on Vivid S5. The TVI button is
always installed even if option is not installed.
To Next Page
Loading...
