Getting started
Vivid S5/Vivid S6 User Manual 77
R2424458-100 Rev. 2
Freeze keys
The freeze keys are used to freeze images and cine loops in all
modes for on-line analysis.
Display Format Key
Key Description
Stops or restarts all data acquisition. When scan
is frozen, the Trackball can be used to scroll
through the cine loop.
Activates or freezes 2D mode. In simultaneous
mode, pressing
2D FREEZE will activate or
deactivate the 2D image, leaving the other mode
display unchanged. In freeze mode, stops/starts
the cineloop.
Key Description
Toggles the display priority of 2D-Mode or
Doppler/M-Mode and top/bottom or side by side
display when working in combined mode.
Enables multiple image display windows in
which two or four images can be viewed
simultaneously. When reducing the number of
images, the active window will always been kept.
Toggles the active window in multiple imaging
mode. The active window is indicated by a
highlighted frame. All imaging controls are
normally applied only to the active window.
Same arrows are used while reviewing images
from clipboard, the active frame may be stepped
forward or backwards to review the next or
previous image.
To Next Page
Loading...
