Getting started
Vivid S5/Vivid S6 User Manual 79
R2424458-100 Rev. 2
Trackball operation
The Trackball area consists of the trackball and five
surrounding keys. Three of these have the very same function
(the
SET function) for ergonomic reasons.
P2 Prints the current imaging screen content to a
printer assigned to a second port (configurable).
The default factory configuration is set to
"Secondary Capture". For more information see
page 623.
Key Description
Trackball Used for navigation and together with the
surrounding keys, to move, select or activate
objects on the screen.
Trackball
Button
Controls the trackball assignments between the
mode-specific options. By pressing
TRACKBALL,
the trackball function will cycle through the
possible assignments, which are indicated in the
lower right corner of the screen (see page 108).
Set Depending on the situation (see Figure 3-3,
page 109):
• Performs the selected control or highlighted
menu item.
• Toggles between the Trackball functions within
the active group.
The key is duplicated for ergonomic reasons.
Key Description
To Next Page
Loading...
