Geeetech Prusa I3 Pro C User Manual

22
GEEETECH
Step4. Drill a hole on the other end of the belt and fix it on the belt -mount with a M3
x 10 screw and M3 washer.
*Tips:
1. before you drill your second hole, make sure to pull belt tightly to make sure to find
proper placement of hole for a tight belt, if it is too loose, it will hinder the move of t
he print platform.

Geeetech Prusa I3 Pro C Specifications

General

Brand	Geeetech
Model	Prusa I3 Pro C
Category	3D Printers
Language	English