Geeetech Prusa I3 Pro C - Mount Z-Axis End Stop

28
GEEETECH
NO.A6
3
Z Motor support plate
NO. A7
1
Z Motor support plate
NO.27
10
M3 x 16 screw
NO.17
10
M3 square nut
Step1. It would be easier to mount the A4/A5 to A6 and A7 first, and then mount the
assembled part to A1.
Step2.Screw up the acrylic plates with M3 x 16 screws and M3 square nuts.
*The right and left bottom mount are different; Please look at the following picture.