Need help?Do you have a question about the Geeetech Prusa I3 Pro C and is the answer not in the manual?
General| Build Volume | 200 x 200 x 180 mm |
|---|---|
| Layer Resolution | 0.1 - 0.3 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Heated Bed | Yes |
| Bed Temperature | up to 100 °C |
| Nozzle Temperature | up to 250 °C |
| Connectivity | USB, SD Card |
| Machine Weight | 8 kg |
| Print Technology | FDM (Fused Deposition Modeling) |
| Supported Filament | PLA, ABS, PETG |
| Power Supply | 12V |
To Next Page
