Do you have a question about the Geeetech Prusa I3 Pro C and is the answer not in the manual?
Build Volume | 200 x 200 x 180 mm |
---|---|
Layer Resolution | 0.1 - 0.3 mm |
Nozzle Diameter | 0.4 mm |
Filament Diameter | 1.75 mm |
Heated Bed | Yes |
Bed Temperature | up to 100 °C |
Nozzle Temperature | up to 250 °C |
Connectivity | USB, SD Card |
Machine Weight | 8 kg |
Print Technology | FDM (Fused Deposition Modeling) |
Supported Filament | PLA, ABS, PETG |
Power Supply | 12V |