22 ADV200 SP • Quick start up guide - Specification and installation
5.1.3 EMC guide line
In a domestic environment, this product may cause radio inference, in which case supplementary mitigation
Dans un environnement domestique, ce produit peut causer des interférences radio, auquel cas des mesures
d’atténuation supplémentaire peuvent être nécessaires.
Drives are designed to operate in an industrial environment where a high level of electromagnetic interference
ground reference plane.
higher frequencies.
- Make sure that any control equipment (such as a PLC) connected to the inverter is connected to the same
)
on the associated inverter.
-
sary at 90º to each other.
-
tant when the contactors are controlled from the inverter relay .
Note! For further information regarding electro-magnetic compatibility standards, according to Directive 2014/30/EU, conform-
ity checks carried out on Gefran appliances, connection of filters and mains inductors, shielding of cables, ground con-
nections, etc., consult the “Electro-magnetic compatibility guide” (1S5E84) you can download from www.gefran.com.
5.1.4 Block diagram power section
ADV200 SP-1015 ... 5750, ADV200 SP-61320-61600 ADV200 SP-5900-51100
L1
L2
L3
C
D
BR2 (*)
BR1 (*)
L
DC
U
V
W
R
PRECHARGE
B
RAKING
IGBT (
OPT
.)
L1
L2
L3
C
D
L
DC
U
V
W
R PRECHARGE
ADV200 SP-3220-DC... 61600-DC
C
D
U
V
W
C
DC LINK
450 - 750 Vdc
(*) Terminals BR1/BR2 are standard up to size
ADV200 SP-3300, optional in sizes ADV200 SP-
4370 ... 5750, larger sizes are not used.
Warning!
Attention
To Next Page
Loading...
Need help?
General
