ADV200 SP • Quick start up guide - Specification and installation 9
2 - Introduction to the product
-
cation know-how have allowed Gefran to develop a special SW app to optimize the operation of solar pump
systems.
-
System load at maximum output power under varying irradiation
the maximum pumping supply from photovoltaic cells, under any
condition.
-
and grid supply (dual supply systems).
ISOLATED SYSTEMS:
PV alone
DUAL SUPPLY SYSTEMS:
PV or secondary power source
HYBRIDS SYSTEMS:
PV and secondary power source
ADV200 SP
MPPT Control
PV generator
Pump
motor
ADV200 SP
MPPT Control
Grid or
Diesel
Generator
Radiation sensor
PV generator
Pump
motor
ADV200 SP
MPPT Control
Grid or
Diesel
Generator
Radiation sensor
PV generator
Pump
motor
independently or with an external monitor.
-
tion and economic competitiveness in international markets.
STANDARD CONNECTION
M
C D
380Vca -15%
.....
480Vca +10%
350 ... 750Vcc
K1M
K2M (*)
4...20mA
SPD
ADV200 SP
L1
L2
L3
_
+
Radiation
Sensor
PV generator
Insulation
control
_____ Isolated systems
_____ Dual supply systems
(*) K2M required in dual supply systems (PV OR second-
ary power source). Optional in the other system configura-
tions.
For more details on the connections for each single
system configuration, see section “5.5 Typical connection
diagrams”.
0
W/m
2
MPPT
Built-in MPPT Control
Power (W)
Voltage (V)
To Next Page
Loading...
Need help?
General
