92 ADV200 SP • Quick start up guide - Specification and installation
Voltages on heatsink and diode
The device has dangerous voltages (see electrical data on the DC supply side and AC supply side) on all its
parts (heatsinks and diode). In this regard, the insulation of the fastening components of the device towards the
-
peratures. In this regard, consider the operating temperature of the heat sinks, chosen according to the current
of use.
Electrical safety requirements distances
other device of at least 12.7 mm, including the mounting wall and the protective elements of the direct contacts
1000 V DC.
Adequate ventilation distances
free space.
Warning!
To Next Page
Loading...
Need help?
General
