Gema OptiMove CR09-C User Manual

Rev. 00 12/22
22 • Product description OptiMove CR09-C
Connections – rear side
Fig. 7: Connections – rear side (OptiMove CR09-C)
2.1 Power supply
2.2 Axis power supply
2.3 Axis control signals
2.4 DigitalBus parallel
interface
2.5 CAN bus input
2.6 CAN bus output
The cable connections have different plugs and cannot be wrongly
connected on assembly.
Before disconnecting the cables from the sockets, always switch
off the equipment and disconnect the mains cable!

Gema OptiMove CR09-C Specifications

General

Brand	Gema
Model	OptiMove CR09-C
Category	Industrial Equipment
Language	English