A-4
Gendex GXCB-500
TM
Service Manual
G990710 30 June 2008
iCATVision Setup
1. From iCAT Vision select Tools > Setup.
2. Under DICOM Database Root Folder, browse to the iCAT
Vision\ iCAT Vision Root and click OK.
(This may be on the C: drive or on a networked drive).
Setup is the same on all networked and non-networked
computers or workstations.
3. A prompt to restart iCATVision software is displayed. Click
OK.
NOTE: It is currently recommend that when using iCAT Data for 3
rd
party software, perform a separate DICOM export from iCAT
®
. The
data will be interchangeable when third party systems start
accepting compressed DICOM.
To Next Page
Loading...
