5-4
Gendex GXCB-500
TM
Service Manual
G990710 30 June 2008
System Assembly
There are two methods used for shipping the device; assembled and
non-assembled. Start with step one for the non-assembled scanner.
Start with step 9 for scanners that are shipped assembled.
Before moving the System into place, ensure that the area is clean
and that there is ample room to work.
This system has devices that require a two person lift. Failure to
comply may cause bodily injury. Two adults are required to unpack
and assemble this system.
1.
With the help of an assistant,
install the Lower Plate under the
two Leg Assemblies, as shown.
2.
Attach with mounting hardware,
four SHCS 1/4-20 x 5/5 long with
1/4” Split Washers, both sides.
To Next Page
Loading...
