A-5
G990710 30 June 2008
iCATTransfer
NOTE: iCATTransfer is not required for iCAT
®
17-19 Systems.
iCATVision is restricted to iCAT
®
DICOM scans and necessitates an
“authentication” of DICOM data (Digital Imaging
Communications). Authentication is performed by a program called
“iCATTransfer” which is installed and executed on the iCAT
®
Acquisition Computer (computer capturing the scan) or another
computer on the same network, in special cases. iCATTransfer
authenticates and stores all newly exported DICOM data (from
iCAT
®
software, to the Watch folder, and then to the Image Root
folder.) The Image Root folder typically resides on a server or
another central storage location.
If the computers are on the same network as the iCATTransfer, then
there is direct access to the patient images. If running outside this
network (e.g. a referring doctor’s office), then patient data may be
transferred via a CD to the remote computer’s Image Root folder.
To reiterate, iCATVision only accepts iCAT
®
DICOM data that is
authenticated by iCATTransfer. Images from the GXCB-500
system do not require iCATTransfer.
Install iCATTransfer
1. Unzip the iCATTransfer.zip file to the iCAT Vision folder, it
unzips to iCATTransfer.exe.
2. Double click the .exe file to execute the program.
A shortcut can be created for this program onto the desktop.
To unzip a file: Right-click the file and click Extract on the
shortcut menu.
To Next Page
Loading...
