GeoVision GV-IP SERIES User Manual

114
6.1.1 Using the Web Interface
Log into the Web interface and follow the steps below to update the firmware.
1. At the top, click Setup.
2. In the left menu, select System and select Maintenance. This page appears.
Figure 6-1
3. Click the Browse button to locate the firmware file (.zip) saved at your local computer.
4. Optionally select Upgrade Boot Program to reboot the camera after a successful
upgrade.
5. Click the Upgrade button to process the upgrade.

GeoVision GV-IP SERIES Specifications

General

Brand	GeoVision
Model	GV-IP SERIES
Category	Security Camera
Language	English