4.6.9 Auto Tracking
Auto Tracking allows you to track moving objects for as long as 300 seconds.
There are certain limitations that cause ineffective tracking:
• Number of the targets: The camera can only track one person at a time. When more
than one people walks into the detection area, only the first person entering the scene
is tracked. When the specified tracking time is over, the camera then continues to
track the second person.
• Obstructions: When the target is blocked behind other objects while walking through
the detection zone during tracking, the target will be lost.
For GV-SD2722-IR / SD3732-IR
Figure 4-48
1. Enable Auto Tracking.
2. Enable Continuously Track for round-the-clock tracking.
3. Type the amount of time for the camera to keep tracking moving objects in the Tracking
Timeout(s) field.
4. Select one of the following for Zoom.
Auto: The camera automatically zooms in on the moving objects upon tracking.
Current Zoom: The camera remains in its current zoom level when tracking moving
objects.
To Next Page
Loading...
Need help?
General
